Save not only energy with the passive house set on a comparison to the consumption of heating energy between two types, it is noted with great surprise the passive house about 80% less heating energy claimed. This sensational low fuel consumption comes through the absolutely safe heat insulation and in the House. The thickness of the heat insulation boards on the House is minimum 25 cm and 40 cm maximum. This is according to region and climate. Also be installed Windows with triple glazing and insulated window frames, so keep the heat in the House.

A special ventilation system ensures constant fresh air working with heat recovery. This is useful especially for people with allergies, because this will bring no pollen into the House. Our Sun is used as the main source of energy. Because no heat can escape through the perfect insulation, serve even powered appliances and even the body heat of the occupants for additional energy sources. By the additional heating of fresh air by the Special You need no separate power source ventilation, even in winter when heavy frost. The always uniform ventilation and the always constant temperatures in the interior walls and floors, damp walls and thus mold of the past belong to. The architect for such a passive house calculate all components which adversely can affect the House prior to the construction. At least 70-75% of the heat of the exhaust air of fresh air be returned through a heat exchanger. This is done by the fresh and exhaust air in different pipes are travelling together. Since passive houses are very supported because their heating costs savings, also a normal earners can build such a House with easy credit. Dirk STAUDINGER

From the retro refrigerator up to the high-tech cooling combination – that may not be to be considered one of the most important devices in any kitchen is the refrigerator without any question. 24 hours on duty, and that day so a fridge which has to endure! So you must do everything correctly and what you pay attention when purchasing a refrigerator, you will learn in this article. On the size, it comes to how large our new refrigerator should be? A question that is to be considered at the beginning of the new shopping. Here you should not make the mistake, to buy a refrigerator, which is as large as possible and maximum use of the available space in the kitchen. Many times excessive refrigerator is purchased, what will adversely impact on the operating costs. Because an empty fridge uses more energy than a full fridge. For this reason, the capacity of the refrigerator should be fully exploited to save additional costs. Therefore you should from the outset only a realistic “refrigerator size into consideration: as You can say the rule of thumb: for a single fridge with 100-160 L capacity ranges to a two-person household, depending on personal needs. If more than one person in a household life, expect about 50 L capacity per person, so for example, for a family of four about 200 L capacity. Tip: If you have purchased a refrigerator, which is too large and is often only half full, fill the empty space! E.g. things otherwise not necessarily would be in the refrigerator, E.g. the bottles from your minibar is suitable for this purpose. Or Pack creams and nail polishes in a small box (E.g. shoe box) and store them in the refrigerator. And very much space in the fridge: incorporate your breakfast cereal and carton in the fridge! Buy energy-efficient from the outset to save costs, you should buy only refrigerators that have at least the energy class a ++. You are best advised to a device of the energy class A+++. But are these devices in the More expensive, but seen over the years (and a new fridge has a life expectancy of 10-15 years quite) drive acquisition with lower energy consumption significantly cheaper. The additional costs for the A+++ device have paid off after approx. 2 years. Here a small Bill: A refrigerator with a low energy class consumes E.g. 0.85 kWh per day. At the cost of a kWh of 0.22 euro that makes about 70 euros a year. The energy class a ++ refrigerators consumed approximately 0.35 kWh per day, however, and the cost amounts to 30 euros a year! 40 euros in the year, you can save! Design for the eye eats with! If it has complied with all factors for energy saving and energy efficiency, there is finally a less theory dry criterion: the appearance of the refrigerator. Because who has the whole apartment full of designer furniture, which also wants that drops the fridge not out of line. But here you must worry these days more: many refrigerators come in chic design Therefore! By the modern chrome look up to the retro fridge in the retro-design no wish remains to be and you will find a model that suits personal taste and the designer furniture in the remaining Setup guaranteed.

Whether as a message board for the whole family, in the Office or in the clubhouse. This innovation from TapetenJoe brings not only creativity, but also as a great benefit with it! The new Panel slides are equipped with a specially designed, durable vinyl surface which can easily be marked with chalk. The new panel slide by Tapetenjoe.de are in seconds on any smooth, dust and grease-free surface are attached and can be removed just as quickly again, without damaging the underground in. This plate slides can be used again! Now you have the opportunity, wherever it pleases you to leave notes to write down your ideas or to paint everywhere. Glue the boards on a Cabinet on the wall, the fridge or wherever you like. To decorate – no problem! Simply detach and stick to another location! Get the Board slide in a range of 2. chalk pencils.

The Panel slide there in many different trend colors such as Mint, white, pink, red, orange, Brown, purple. Of course are the classic colors such as green, black or blue available. Everyone can cut themselves individually the table slides, the standard formats are 70 x 50 or 150 x 60 incl. 2 PCs. chalk and very well suited to day menus in restaurants or bars..

Mirror as simple water bowls in the stone age to modern glass mirrors embellishment of the own appearance by jewelry or body painting was always a need of the people. Like archaeological finds prove there is not a new phenomenon as one might like to think, but, even in the stone age already people jewelry used to enhance her own appearance”. Goes hand in hand with this need to consider also themselves, to gain knowledge of the own appearance and its beauty. Of course there was in the stone age to meet yet no correct levels by this request, but people could see in the still waters of your own. So were shells which have been filled with water, arguably the first manufactured items could be described as a mirror. The first metal mirrors were then in the bronze age. They were simple bronze plates, which were polished until its surface was completely smooth, so that she could take back a mirror image.

They were then usually with a handle connected to the simpler use. So, the first proper mirrors were hand mirror. The technique of mirror making and generally not heavily changed until around the second century after Christ. Only the other metals have been used, or the mirror were decorated on the back with any images or scenes. Also the folding mirror originated in ancient Rome. The first finds of glass mirrors go back to the second century after Christ.

Usually, a thin tin foil was used here as a reflective surface behind the glass. In the Middle Ages was a new technique, in which metal alloys in blown glass balls was admitted. So could cool the ball randomly in several pieces of convex mirror part. A new technology for the manufacture of the mirror was founded in the early modern period, and these consisted of connecting tin foil to mercury and glass. The Tin Tin amalgam was along with the mercury. So you could produce straight, smooth and not convex mirror. In the 19th century it then went to silver as the reflective material over, because the amalgam due to its toxicity was banned. Nowadays, aluminium is used, which either through evaporate or applied as a foil under vacuum onto the surface of the glass. So we can enjoy today with large mirrors in our bathrooms, to look at our image. Also the mirror became a subject of which radiates a kind of refinement and luxury, although today really as good as everyone has multiple mirror. You get level offered today in many different versions. For example as a normal mirror in the bathroom, as a large wall mirror, folding mirrors, ordinary hand mirror or but as a mirror which on pieces of furniture are installed. Especially for example the mirror close to the closet, put on the clothes right after to see how it looks. Another piece of furniture with mirror is the bathroom mirror cabinet. If you want to know more about the latter, and are interested in buying mirror cabinet, visit our bathroom mirror dispensing it.

Wood-concrete composite bridge Chiemgau arena in Ruhpolding-Ruhpolding, July 2010 – the winter sports center ‘Chiemgau-arena”in Ruhpolding aims for the 2011 Biathlon World Cup and the World Championship in biathlon 2012 shine in new splendour. In the course of this transformation measure a bridge construction project represents a technical highlight: one novel designed wood-concrete composite bridge by the FA. Sadia + Miebach fascination bridges GmbH was supervised. This composite system when a bridge to the usage comes for the first time in Germany of the HBV. The building spans over two fields with 10.60 m / 5.60 m at the entrance of the Chiemgau-arena and can demonstrate the considerable width of the Mantel 14.50 m.

So the bridge with a 600W slopes-bully can be navigated, it is classified (i.e. for 30 tons of vehicles) in the bridge class 30. The main structure consists of nine bent Board laminated wood beams arranged in a distance of 1.50 m. Each of these carriers has pasted push connectors in the production halls of the Sadia Provide Holzindustrie GmbH. As formwork, moved between the main girders of wood veneer layer with a thickness of 33 mm and protected with a membrane from possible water impacts during construction. The 20 cm thick concrete slab was brought up in the place concrete procedures and serves both a road and carrier plate to the distribution of radial load as well as the constructive wood protection (rain cover). Bearing all the forces of glued steel steels are forwarded in this bridge construction work.

This result in very sophisticated, architecturally unobtrusive steel fittings with few visible bolts, which serve only the fixation for the mounting and securing cross train. Through the clever choice of materials for the components and the lanyard, the woodwork quite establish themselves in the context of ‘ high-tech ‘ applications and claim. Description of the company FA.